Cover Caddy

Q: Does the Cover Caddy work with round spas?

A: Since this unit is a slide-under-the-spa model, you could possibly use this with a round spa. However, unlike the Covermate Freestyle (with its single post), it has not been specifically designed to be used with a round spa.

Q: Will this work with a spa with 4 speaker horns? If not, what do you have that will work, preferably with gas powered assistance.

A: It will not work with a spa that has raised speakers. I would recommend the Covermate Freestyle.

Q: Will this lifter work on a swim spa that is 52

A: Cover Valet makes a Swim Spa Conversion Kit which allows the lifter to accommodate up to 55" tall. We unfortunately do not carry this kit, however, we have heard some people have had success on Amazon.

Q: I was referred to you by the people at Cover Valet. I am looking to install a cover lifter on a Viking 3 (round, 6ft diameter) spa. The Cover Valet people recommended the Cover Caddy. In your experience, does it wobble very much?

A: The Cover Caddy by Cover Valet is designed to provide smooth, controlled lifting with its gas spring-assisted mechanism. However, because it uses a single undermount support system, some slight side-to-side movement may occur when raising or lowering a large or heavy spa cover. When properly installed on a stable, level surface, the Cover Caddy should feel secure during normal operation. Excessive wobbling, shifting, or instability is not expected and could indicate an installation or adjustment issue.

Q: Would this work for an 8ft round cover?

A: The Cover Caddy is designed to accommodate round spas and supports covers up to 120 inches (10 feet). An 8-foot round cover measures 96 inches in diameter, so it falls within the manufacturer's stated size limit. There are a few additional requirements to consider: - Spa height: Standard compatibility is 30–41 inches. - Rear clearance: At least 36 inches of space behind the spa. - Installation: The undermount mounting plate must fit securely beneath the hot tub.

Q: Will the Cover Caddy hot tub cover lifter fit my spa?

A: The Cover Caddy is designed to accommodate virtually any hot tub shape, including square, rectangular, round, octagonal, and spas with rounded or cut corners. It supports spa covers up to 120 inches and is designed for standard above-ground hot tubs measuring 30 to 41 inches tall. For proper operation, you'll need at least 36 inches of clearance behind your spa. No additional side clearance is required. An optional swim spa conversion kit is available for taller spas up to 55 inches, with additional rear clearance requirements.

Q: Does the Cover Caddy require drilling into my hot tub?

A: No. One of the biggest advantages of the Cover Caddy is its no-drill undermount installation. The mounting plate fits beneath your hot tub, eliminating the need to drill holes into the spa cabinet or surrounding deck. This makes it an excellent choice for homeowners who want to preserve their hot tub's appearance while enjoying the convenience of a premium cover lifter. The mounting plate must rest on a flat, fully supported surface, and installation may require draining or repositioning the spa.

Q: How does the Cover Caddy make removing a hot tub cover easier?

A: The Cover Caddy uses a powerful gas spring-assisted lifting mechanism to reduce the effort needed to raise and lower your spa cover. Instead of manually lifting and moving a bulky cover, you can use the lifter to guide it into a convenient storage position beside your hot tub. Its adjustable, low-profile design also helps keep the cover out of your line of sight while you relax. The result is easier one-person operation, less physical strain, and a more enjoyable hot tub experience.